2层聚氨酯橡胶 MA-W

Z

高强度 中间转印带偏靠导向件

粘贴在彩色复合机中间转印带内,防止转印带蛇行的导向件通过在下层使用硬度高聚氨酯橡胶,可以延长粘贴时的延伸在上层使用耐磨性高的部件,提高耐久性。

特征

Z

双层结构(下层)

・使用 90 度聚氨酯橡胶,将粘贴时的延伸降至最低,并将聚氨酯橡胶紧密在转印带上。

Z

双层结构(上层)

・使用60度聚氨酯橡胶,由于材质耐磨性优异,在高速机器方面也有使用的实迹。

Z

剥离强度

・两层聚氨酯是同一材料,因此粘附强度高,不会发生剥落。

Z

长尺加工

・由于粘贴在转印带内部,因此需要提供长尺寸的产品,但我司槌屋,有能进行2500mm的冲裁的加工机,因此可以提供不产生接缝的产品。

使用示例

复印机和印表机

关连制品

碳粉防溅膜

海绵/胶带/胶片加工品

2層聚氨酯橡胶 MA-W

Z

高強度 中間轉印帶偏靠導向件

粘貼在彩色複合機中間轉印帶內,防止轉印帶蛇行的導向件通過在下層使用硬度高聚氨酯橡膠,可以延長粘貼時的延伸在上層使用耐磨性高的部件,提高耐久性。

特徴

Z

雙層結構(下層)

・使用 90 度聚氨酯橡膠,將粘貼時的延伸降至最低,並將聚氨酯橡膠緊密在轉印帶上。

Z

雙層結構(上層)

・使用60度聚氨酯橡膠,由於材質耐磨性優異,在高速機器方面也有使用的實蹟。

Z

剝離強度

・兩層聚氨酯是同一材料,因此粘附強度高,不會發生剝落。

Z

長尺加工

・由於粘貼在轉印帶內部,因此需要提供長尺寸的產品,但我司槌屋,有能進行2500mm的沖裁的加工機,因此可以提供不產生接縫的產品。

使用例

複印機和印表機

関連製品

碳粉防濺膜

海綿/膠帶/膠片加工品

2-layer Urethane rubber guide MA-W

Z

The high-strength intermediate transfer belt leans against the guide

Paste in the middle transfer tape of the color laminating machine to prevent the
displacement of the guide.By using polyurethane rubber with high hardness in the
lower layer, the extension when sticking can be extended.The use of highly
wear-resistant components in the upper layer improves durability.

Feature

Z

Double-layer structure (lower layer)

Using 90-degree polyurethane rubber, the extension when applying is minimized and the polyurethane rubber is tightly attached to the transfer tape.

Z

Double-layer construction (upper layer)

60-degree polyurethane rubber is used, and due to the excellent wear resistance of the material, it is also used in high-speed machines.

Z

Peel strength

The two layers of polyurethane are the same material, so the adhesion strength is high and no peeling occurs.

Z

Long processing

Since it is attached to the inside of the transfer tape, it is necessary to provide long-size products, but Tsuchiya has a processing machine that can perform 2500mm blanking, so we can provide products that do not create seams.

Example of usage

Copiers and printers

Related Products

Toner shatterproof film

Rubber products

2層ウレタンゴムガイド MA-W

Z

高強度 中間転写ベルト寄り止めガイド

カラー複合機の中間転写ベルト内に貼付けて、ベルトの蛇行を防止する寄り止めガイドです。

下層に硬度の高いウレタンゴムを使用することで、貼り付ける際の延びを防止し、上層部に耐摩耗性の高い部材を使用することで耐久性をUPさせます。

 

特長

Z

2層構造(下層)

・90度のウレタンゴムを使用し、貼り付け時の延びを最小限に抑え、またウレタンゴムがベルトに密着する仕様となっております。
Z

2層構造(上層)

・60度のウレタンゴムを使用し、耐摩耗性に優れた材質の為、高速機への実績もあります。
Z

剥離強度

・2層のウレタンは同材質の為、密着強度が高く剥がれが発生しません。
Z

長尺加工

・ベルト内部に貼り付けることから長尺での製品提供が必要となりますが、槌屋では2500mmの打ち抜き加工機がある為、継ぎ目が発生しない製品の提供が可能です。

採用例

複写機・プリンタ

関連製品

トナー飛散防止フィルム
スポンジ/テープ/フィルム加工品
转印单元2层聚氨酯橡胶 MA-W